Brönsted方程动力学模型研究ZSM-5催化乙烯齐聚及芳构化活性和酸强度分布之间的定量关系

乙烯催化齐聚和芳构化是烯烃高值化和合成液体燃料的关键过程，采用NH₃-TPD谱图分析计算方法得到的探针分子脱附活化能作为催化剂的酸位点强度分布的参数，结合线性自由能理论在Br?nsted方程中引入酸强度对反应的影响因子γ作为动力学方程参数关联探针分子脱附活化能与反应活化能，明确固体酸酸强度的基准在催化动力学方程中的物理意义。建立同为MFI拓扑结构 Si /Al摩尔比为12.5、19、25、60、70的ZSM-5分子筛催化剂上不同酸强度位和乙烯齐聚及芳构化中氢转移、齐聚、芳构化各单元步骤以及对应的烷烃、低碳烯烃和芳烃产物分布的定量关系。根据拟合得到动力学参数γ可以发现不同强度的酸位点对乙烯齐聚及芳构化具有不同的作用系数。氨脱附活化能(DAE)为90 kJ·mol^-1的酸位点是氢转移反应的主要活性位点，而对于乙烯齐聚反应中主要的活性酸位点为DAE 90 kJ·mol^-1和124 kJ·mol^-1，DAE为150 kJ·mol^-1的酸位点是芳构化反应的主要活性位点。     

基于EDEM和Fluent的废电路板颗粒气流静电分选仿真研究

为了提高废电路板破碎料的分选效率,选用铜颗粒和玻璃颗粒作为研究对象,利用静电气流复合分选技术在EDEM和Fluent耦合仿真下寻求最佳的分选参数。并在Fluent中添加风,对风速进行优化。结果表明:施加在两极板上的库仑力在±1.7×10~5nC之间时,粒径为3mm的颗粒综合分选效率最优,在此基础上,当风速达到35m/s时,综合分选效率都优于静电分选效率。     

浮选柱反浮选脱镁工艺研究

利用浮选柱对高硅镁中低品位胶磷矿(P_2O_5 25.74%、MgO 1.31%、SiO_2 13.79%)进行反浮选脱镁实验,优化了反浮选脱镁工艺,并比较了浮选柱和浮选机的反浮选脱镁效果。确定最佳脱镁工艺条件为:捕收剂用量1.2 kg·t~(-1)、磷酸用量7 kg·t~(-1)、充气流量600 L·h~(-1)、冲洗水流量6 L·h~(-1)、柱径比8,在此条件下,得到P_2O_5品位为27.36%、MgO含量为0.64%的精矿,且精矿产率为92.65%,P_2O_5回收率为98.71%。     

中医药临床研究电子数据管理特点及标准操作规程的制定

电子数据管理具有节约成本、缩短研发周期、提高数据质量等优势,已逐步成为临床研究数据采集与管理的主流形式,规范开展电子数据管理工作是提高中医药临床研究质量的重要措施。本文介绍了临床研究电子数据管理标准操作规程(standard operating procedure, SOP)的作用、制定原则、一般体例、制定流程、SOP的管理与培训以及实际工作中常用的SOP,最后讨论了中医药临床研究电子数据管理的特点及难点,并给出了建议的解决措施。     

Effects of malondialdehyde-induced protein oxidation on the structural characteristics of rice protein

Malondialdehyde (MDA) was selected to represent a secondary by-product of lipid peroxidation during rice ageing. This study aimed to investigate the effects of MDA modification on the structural characteristics of rice protein. The results showed that as MDA concentration increased, rice protein carbonyl and disulphide groups increased, but sulphydryl content decreased. The blue shift of maximum fluorescence peak, the decrease of rice protein intrinsic fluorescence intensity and the reduction of surface hydrophobicity indicated the formation of protein aggregates caused by MDA oxidative modification. The results of molecular weight distribution and particle size distribution showed that MDA modification resulted in the formation of soluble protein aggregates, and the decrease of rice protein solubility indicated that insoluble protein aggregates were formed. Results of protein electrophoresis showed that MDA modification contributed to rice protein aggregation via non-disulphide covalent bonds. The results showed that rice protein gradually aggregated with increasing MDA concentration.     

少量有机碳对单级自养脱氮工艺性能的影响

采用序批式生物膜反应器(SBBR),经过4个阶段的培养,快速富集好氧氨氧化细菌(AOB)和厌氧氨氧化细菌(AnAOB),并考察不同低碳氮比对工艺脱氮性能的影响。结果表明,NH4^+-N去除率可达到99%以上,TN去除率可达到90%以上。对应C/N=0、1和2时,反应器出水NH4^+-N和TN去除率分别为99.59%、99.5%、98.47%和93.75%、97.22%、98.11%。说明少量COD的存在,可实现同步硝化-厌氧氨氧化-反硝化,且在一定程度上提高脱氮效率。     

A mini review on two-dimensional nanomaterial assembly

Two-dimensional (2D) nanomaterials have attracted a great deal of attention since the discovery of graphene in 2004, due to their intriguing physicochemical properties and wide-ranging applications in catalysis, energy-related devices, electronics and optoelectronics. To maximize the potential of 2D nanomaterials for their technological applications, controlled assembly of 2D nanobulding blocks into integrated systems is critically needed. This mini review summarizes the reported strategies of 2D materials-based assembly into integrated functional nanostructures, from in-situ assembly method to post-synthesis assembly. The applications of 2D assembled integrated structures are also covered, especially in the areas of energy, electronics and sensing, and we conclude with discussion on the remaining challenges and potential directions in this emerging field.

     

基于信号增强的缓慢泄漏检测方法

目前管道泄漏检测方法可有效检测突发泄漏，对于缓慢泄漏则存在检测灵敏度低、定位不准确等问题。基于此，提出了一种基于信号增强的缓慢泄漏检测方法。通过信号压缩（抽取及移位）克服缓慢泄漏压力信号下降平缓的缺点；根据声波信号具有波形尖锐突出、对突发泄漏敏感的优点，通过建立以压力为输入、虚拟声波为输出的声波信号变送器模型，将压力信号转换为声波信号，克服了泄漏压力信号容易被淹没在管道压力波动及背景噪声中的缺点，实现了缓慢泄漏信号的增强；利用临近插值方法重构虚拟声波信号，基于延时互相关分析实现了缓慢泄漏的准确定位。实验结果表明，该方法具有显著的信号增强效果和定位精度，实现了缓慢泄漏的准确检测。     

On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach

This research presents bending responses of FG-GPLRC plates based upon higher order shear deformation theory (HSDT) for various sets of boundary conditions. The rule of the mixture and modified Halpin–Tsai model are engaged to provide the effective material constant of the composite layers. By employing Hamilton’s principle, the governing equations of the structure are derived and solved with the aid of the differential quadrature method (DQM). Afterward, a parametric study is done to present the effects of three kinds of FG patterns, weight fraction of the GPLs, radius ratio, and thickness to inner radius ratio on the bending characteristics of the FG-GPLRC disk. Numerical results reveal that in the initial value of the \(Zt/h\), using more GPLs for reinforcing the structure provides an increase in the normal stresses but this matter is inverse for the higher value of the \(Zt/h\). The results show that considering the smaller radius ratio is a reason for boosting the shear stresses of the structure for each \(Zt/h\). Another consequence is that for the negative value of \(Zt/h\), it is true that by increasing \(h/{R}_{i}\) , the normal stresses increases but if there is positive value for \(Zt/h\), the radial and circumferential stresses fall down by having an increase in the \(h/{R}_{i}\).